An open and free bittorrent tracker https://erdgeist.org/gitweb/opentracker
No puede seleccionar más de 25 temas Los temas deben comenzar con una letra o número, pueden incluir guiones ('-') y pueden tener hasta 35 caracteres de largo.
 
 
 
 

107 líneas
3.9 KiB

  1. # opentracker config file
  2. #
  3. # I) Address opentracker will listen on, using both, tcp AND udp family
  4. # (note, that port 6969 is implicite if ommitted).
  5. #
  6. # If no listen option is given (here or on the command line), opentracker
  7. # listens on 0.0.0.0:6969 tcp and udp.
  8. #
  9. # The next variable determines if udp sockets are handled in the event
  10. # loop (set it to 0, the default) or are handled in blocking reads in
  11. # dedicated worker threads. You have to set this value before the
  12. # listen.tcp_udp or listen.udp statements before it takes effect, but you
  13. # can re-set it for each listen statement. Normally you should keep it at
  14. # the top of the config file.
  15. #
  16. # listen.udp.workers 4
  17. #
  18. # listen.tcp_udp 0.0.0.0
  19. # listen.tcp_udp 192.168.0.1:80
  20. # listen.tcp_udp 10.0.0.5:6969
  21. #
  22. # To only listen on tcp or udp family ports, list them this way:
  23. #
  24. # listen.tcp 0.0.0.0
  25. # listen.udp 192.168.0.1:6969
  26. #
  27. # Note, that using 0.0.0.0 for udp sockets may yield surprising results.
  28. # An answer packet sent on that socket will not necessarily have the
  29. # source address that the requesting client may expect, but any address
  30. # on that interface.
  31. #
  32. # II) If opentracker runs in a non-open mode, point it to files containing
  33. # all torrent hashes that it will serve (shell option -w)
  34. #
  35. # access.whitelist /path/to/whitelist
  36. #
  37. # or, if opentracker was compiled to allow blacklisting (shell option -b)
  38. #
  39. # access.blacklist ./blacklist
  40. #
  41. # It is pointless and hence not possible to compile black AND white
  42. # listing, so choose one of those options at compile time. File format
  43. # is straight forward: "<hex info hash>\n<hex info hash>\n..."
  44. #
  45. # If you do not want to grant anyone access to your stats, enable the
  46. # WANT_RESTRICT_STATS option in Makefile and bless the ip addresses
  47. # allowed to fetch stats here.
  48. #
  49. # access.stats 192.168.0.23
  50. #
  51. # There is another way of hiding your stats. You can obfuscate the path
  52. # to them. Normally it is located at /stats but you can configure it to
  53. # appear anywhere on your tracker.
  54. #
  55. # access.stats_path stats
  56. # III) Live sync uses udp multicast packets to keep a cluster of opentrackers
  57. # synchronized. This option tells opentracker which port to listen for
  58. # incoming live sync packets. The ip address tells opentracker, on which
  59. # interface to join the multicast group, those packets will arrive.
  60. # (shell option -i 192.168.0.1 -s 9696), port 9696 is default.
  61. #
  62. # livesync.cluster.listen 192.168.0.1:9696
  63. #
  64. # Note that two udp sockets will be opened. One on ip address 0.0.0.0
  65. # port 9696, that will join the multicast group 224.0.42.23 for incoming
  66. # udp packets and one on ip address 192.168.0.1 port 9696 for outgoing
  67. # udp packets.
  68. #
  69. # As of now one and only one ip address must be given, if opentracker
  70. # was built with the WANT_SYNC_LIVE feature.
  71. #
  72. # IV) Sync between trackers running in a cluster is restricted to packets
  73. # coming from trusted ip addresses. While source ip verification is far
  74. # from perfect, the authors of opentracker trust in the correct
  75. # application of tunnels, filters and LAN setups (shell option -A).
  76. #
  77. # livesync.cluster.node_ip 192.168.0.4
  78. # livesync.cluster.node_ip 192.168.0.5
  79. # livesync.cluster.node_ip 192.168.0.6
  80. #
  81. # This is the admin ip address for old style (HTTP based) asynchronus
  82. # tracker syncing.
  83. #
  84. # batchsync.cluster.admin_ip 10.1.1.1
  85. #
  86. # V) Control privilege drop behaviour.
  87. # Put in the directory opentracker will chroot/chdir to. All black/white
  88. # list files must be put in that directory (shell option -d).
  89. #
  90. #
  91. # tracker.rootdir /usr/local/etc/opentracker
  92. #
  93. # Tell opentracker which user to setuid to.
  94. #
  95. # tracker.user nobody
  96. #
  97. # VI) opentracker can be told to answer to a "GET / HTTP"-request with a
  98. # redirect to another location (shell option -r).
  99. #
  100. # tracker.redirect_url https://your.tracker.local/