disable stat_cache if server.follow-symlink = "disable"
if server.stat-cache-engine = "simple". Caching is still enabled
for server.stat-cache-engine = "fam" since the FAM notification is
almost immediate, however there is still a small race condition.
NOTE: server.follow-symlink = "disable" implementation still has
time-of-check versus time-of-use (ToC-ToU) race conditions and
its use is *not recommended* except to discourage symlinking.
It *does not* prevent symlinking by a determined attacker with
the ability to create files on the server.
server.stat-cache-engine = "disable" can also be used to discourage
symlinking, and also does not eliminate ToC-ToU race conditions.
While more modern systems might use openat() and other *at() routines
to eliminate the ToC-ToU race conditions, this is not currently
implemented in lighttpd. Besides, for systems needing such
protections against actors able to modify local files, it would be
better to set up multiple lighttpd servers running in separate user
contexts with filesystem permissions preventing access, rather than
giving a single lighttpd server running under a single lighttpd user
access to files across security boundaries, and trying to prevent
access by lighttpd user if a file is a symlink.
Note that there are performance implications to setting either of
server.follow-symlink = "disable"
server.stat-cache-engine = "disable"
since stat cache normally reduces filesystem overhead for
"security: stat cache *very large* race condition if caching when
server.username can not be root or 0.
server.groupname can not be root or 0.
If server.username is set, previous behavior might retain gid 0
if server.groupname was not set.
New behavior calls setgid() on server.username primary gid, and
then initgroups on server.username if server.username is set but
server.groupname is not set.
"server.groupname not required with server.username"
If server.upload-dirs is not configured, then attempt to use TMPDIR
from the environment, if set, or else use /var/tmp which is not often
a tmpfs, unlike /tmp. Warn at startup if tempdirs are not present.
try AF_INET after AF_INET6 if server.use-ipv6 = "enable" and
getaddrinfo() fails EAI_ADDRFAMILY when hints.ai_family is AF_INET6.
(Prefer IPv6 instead of setting hinst.ai_family to AF_UNSPEC since
lighttpd only uses the first address returned)
read all available records from SSL_read(), even if larger than
MAX_READ_LIMIT, since the data is already in memory. openssl is
configured with SSL_MODE_RELEASE_BUFFERS and will release openssl
buffers once records have been read.
Without reading available data, there was a chance that the connection
would hang waiting for a read event on the fd, even though all the
data had already been read from kernel socket buffers and was in openssl
memory waiting to be read with SSL_read().
(thx glen and avij)
reverts part of commit:dbdab5db which swapped REQUEST_URI, REDIRECT_URI
"mediawiki redirect loop if REQUEST_URI not orig req in 1.4.40"
REQUEST_URI and REDIRECT_URI are not part of CGI standard environment.
The reason for their existence is that PATH_INFO in CGI environment may
be different from the path in the current request. The main reason for
this potential difference is that the URI path is normalized to a path
in the filesystem and tested against the filesystem to determine which
part is SCRIPT_NAME and which part is PATH_INFO. In case-insensitive
filesystems, the URI might be lowercased before testing against the
filesystem, leading to loss of case-sensitive submission in any
resulting PATH_INFO. Also, duplicated slashes "///" and directory
references "/." and "/.." are removed, including prior path component in
the case of "/..". This might be undesirable when the information after
the SCRIPT_NAME is virtual information and there target script needs the
virtual path preserved as-is. In that case, the target script can
re-parse REQUEST_URI (or REDIRECT_URI, as appropriate) to obtain the
unmodified information from the URI.
con->request.uri is equivalent to con->request.orig_uri unless the
request has been internally rewritten (e.g. by mod_rewrite, mod_magnet,
others), in which case con->request.orig_uri is the request made by the
client, and con->request.uri is the current URI being processed.
Historical REQUEST_URI (environment variable) lighttpd inconsistencies
- mod_cml set REQUEST_URI to con->request.orig_uri
- mod_cgi set REQUEST_URI to con->request.orig_uri
- mod_fastcgi set REQUEST_URI to con->request.orig_uri
- mod_scgi set REQUEST_URI to con->request.orig_uri
- mod_ssi set REQUEST_URI to current con->request.uri
- mod_magnet set MAGNET_ENV_REQUEST_URI to current con->request.uri
and MAGNET_ENV_REQUEST_ORIG_URI to con->request.orig_uri
Historical REDIRECT_URI (environment variable) previously set only in
mod_fastcgi and mod_scgi, and set to con->request.uri
Since lighttpd 1.4.40 provides REDIRECT_URI with con->request.orig_uri,
changes were made to REQUEST_URI for consistency, with the hope that
there would be little impact to existing configurations since the
request uri and original request uri are the same unless there has been
an internal redirect. It turns out that various PHP frameworks use
REQUEST_URI and require that it be the original URI requested by client.
Therefore, this change is being reverted, and lighttpd will set
REQUEST_URI to con->request.orig_uri in mod_cgi, mod_fastcgi, mod_scgi
as was done in lighttpd 1.4.39 and earlier. Similarly, REDIRECT_URI
also has the prior behavior in mod_fastcgi and mod_scgi, and added to
A future release of lighttpd might change mod_ssi to be consistent with
the other modules in setting REQUEST_URI to con->request.orig_uri and to
add REDIRECT_URI, when an internal redirect has occurred.
[core] $HTTP["remoteip"] must handle IPv6 w/o  (existing behavior)
This was inadvertently broken in lighttpd 1.4.40 when IP address
normalization was added.
In $HTTP["remoteip"], IPv6 is now accepted with or without ''.
http_request_host_normalize() expects IPv6 with '', and config
processing at runtime expects COMP_HTTP_REMOTE_IP compared without '',
so '' is stripped (internally) after normalization
clock_gettime() needs -lrt with glibc < 2.17,
and possibly other platforms
This commit contains fixes for CMake and SCONS
See also commit:4d920466 which updated configure.ac for same
"1.4.40 compiling issuses on Debian Wheezy"
Strip bogus "Proxy" header before creating subprocess environment.
(mod_cgi, mod_fastcgi, mod_scgi, mod_ssi, mod_proxy)
Do not emit HTTP_PROXY to subprocess environment.
Some executables use HTTP_PROXY to configure outgoing proxy.
This is not a lighttpd security issue per se, but this change to
lighttpd adds a layer of defense to protect backend processes which
might be vulnerable due to blindly using this untrusted environment
variable. The HTTP_PROXY environment variable should not be trusted
by a program running in a CGI-like environment.
Mitigation in lighttpd <= 1.4.40 is to reject requests w/ Proxy header:
* Create "/path/to/deny-proxy.lua", read-only to lighttpd, with content:
if (lighty.request["Proxy"] == nil) then return 0 else return 403 end
* Modify lighttpd.conf to load mod_magnet and run lua code
server.modules += ( "mod_magnet" )
magnet.attract-raw-url-to = ( "/path/to/deny-proxy.lua" )
CGI web servers assign Proxy header values from client requests to
internal HTTP_PROXY environment variables
httpoxy: A CGI application vulnerability
inherit server.use-ipv6 and server.set-v6only from global scope
into $SERVER["socket"] blocks
(This potential behavior change was announced with lighttpd 1.4.40)
"$SERVER["socket"] to bind to IPv6 by default"
url.access-allow is list of allowed url suffixes (e.g. file extensions)
If url.access-allow has been set, then deny any URL that does not match
the explicitly listed suffixes.
"access_allow directive for lighttpd"
silently use same 'host' if unix socket path is duplicated
(instead of erroring out). Updates commit 97556d99
(It is possible for use of += in config to result in duplicated
fastcgi.server and scgi.server entries)
"Should warn if two FastCGI servers point to same socket file"
fix memory leak
reduce code redundancy
convert code to use newer buffer.h APIs
proper cleanup if upload cancelled or client disconnected
change "starting" message to "not in progress" if upload not in progress