lighttpd 1.4.x https://www.lighttpd.net/
You can not select more than 25 topics Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.

270 lines
13 KiB

==================
Performance Tuning
==================
[[ Note: latest version is found at https://wiki.lighttpd.net/Docs_Performance ]]
[[ Note: see version with links at https://wiki.lighttpd.net/Docs_Performance ]]
important performance tuning rules
* Prefer lighttpd defaults unless you have a reason to change a setting,
and unless you test that changing the setting is beneficial to you.
* Proper functionality is more important than marginal increases in performance;
a web server that does not function as intended is not useful.
Do not sacrifice security or desired operational functioning for marginal
performance improvements.
* Performance tuning is not magic. The recommended approach is that one change
be made at a time, that the change be tested and benchmarked, and that if the
change does not have a measurable and positive impact in real-world scenarios,
that the change be reverted.
lighttpd is generally pretty snappy.
Most of the following are micro-optimizations.
No changes are required unless you have a specific performance issue that you
must address.
lighttpd configuration performance tuning (technical guidelines)
-----------------------------------------
* less is more (and is often simpler, too)
- rely on defaults where possible to reduce unnecessary (duplicative) config
processing (at runtime) to process configuration directives which were
already set to the default values
- set config options in the global scope rather than repeating in sub-scopes.
lighttpd optimizes configuration settings in the global scope and makes
those settings the defaults
- TLS configuration can be set in the global scope and inherited by multiple
$SERVER["socket"]
ssl.pemfile = "..."
ssl.privkey = "..."
$SERVER["socket"] == ":443" { ssl.engine = "enable" }
$SERVER["socket"] == "[::]:443" { ssl.engine = "enable" }
- list only the modules actually used and enabled in server.modules;
comment out the others
- each loaded module registers itself into lighttpd hooks and gets a chance
to handle each request, which is is unnecessary if a module is loaded but
not otherwise configured to be used
- server.compat-module-load = "disable" skips loading the default modules
(mod_indexfile, mod_dirlisting, mod_staticfile), and you can then
explicitly add one or more to server.modules to use them
- tweaks to remove optional functionality
- server.tag = "" skips sending "Server: lighttpd/1.4.xx" in responses;
alternatively, use: server.tag = "lighttpd" to hide the lighttpd version
- server.range-requests = "disable" can be used if all server responses are
small files, but otherwise it is recommended to be left enabled
- review the default lighttpd config provided by your distro
- configs provided by distros aim to be newbie friendly but can introduce
complexity of yet another config framework
- configs provided by distros are often out-dated and then kept for historic
compatibility, rather than current best practices
- example: ~20 years ago some widely used versions of Adobe Acrobat reader
plugin PDF clients misbehaved with range requests. Unfortunately, the
config setting to disable range requests for PDFs has been cargo-culted
into configs since then. Prefer to comment out or remove:
$HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" }
- server.max-connections limits the maximum number of simultaneous connections
to handle and also affects memory usage for the connection cache
- default is (about) 1365 which is oversized for all but the largest
systems. Embedded systems might set server.max-connections = 16 or lower
- server.max-worker = 0 should generally be left unset (or "0"), as
CPU bottlenecks are usually elsewhere
- server.follow-symlink = "enable" (default) should be left enabled. If such
restrictions are required, prefer to run a separate lighttp instance under a
separate user account, and enforce more restrictive file access permissions.
- ssl.read-ahead = "disable" (default) is strongly recommended for slower,
embedded systems which process TLS packets more slowly than network
wire-speed. For faster systems, test if ssl.read-ahead = "enable" improves
performance (or not)
- prefer to configure mod_extforward extforward.hap-PROXY for lighttpd
instances behind HAProxy or load balancers supporting the HAProxy PROXY
protocol
* minimize conditional processing (but not at the cost of proper functionality)
- more conditions means more config processing at runtime
- more conditions means more memory used by config per request
- avoid repeating conditions and its opposite by joining them into if/else
<condition> { ... } else { ... }
<condition> { ... } else <condition> { ... } else { ... }
- sometimes it may take fewer config lines to set a config option once in the
global scope and then, where necessary, to unset the option in a small
number of conditions rather than leaving the default in the global scope
and enabling the config option in many more conditions
- having no config conditions will be among the fastest configs to be
processed, but config processing at runtime is fast and is not typically
a bottleneck
* dynamic backends (mod_proxy, mod_fastcgi, mod_scgi, mod_ajp13, ...)
- prefer to use unix domain sockets (instead of TCP sockets) for connections
from lighttpd to backends running on the same host
- lighttpd can listen on a unix domain socket
(server.bind = "/path/to/lighttpd.sock")
and lighttpd mod_proxy can act as a reverse-proxy to a backend lighttpd
server. Use with mod_extforward to preserve client remote address for the
backend.
* mod_fastcgi
- Recommended: use PHP-FPM (FastCGI Process Manager),
which is available as a package in many OS distros
- If not using PHP-FPM, then see Docs_PerformanceFastCGI
- lighttpd provides mechanisms for lighttpd to start up PHP backends, and
that works well, but PHP-FPM is the modern and recommended mechanism to
manage PHP backends
* mod_rewrite and mod_redirect: short-circuiting
(when using a sequence of regexes)
- consider putting static file matches (passed through unmodified) first,
and using a blank target to indicate no modification
- consider using a blank match as a catch-all, rather than "^(.*)",
which will still match all, but without the regex
url.rewrite-once = (
"^/static/|\.(?:css|jpg)$" => "",
"" => "/index.php${url.path}${qsa}"
)
* mod_indexfile: reduce the number of entries in index-file.names,
if mod_indexfile is enabled
- index-file.names = ("index.html") as a list of one or two entries rather
than a list of, say, 10 differenent file extensions
* cache tuning
- stat_cache: default server.stat_cache-engine = "simple" works well for
typical usage and caches stat() results for 1-2 seconds. Test with
server.stat-cache-engine = "inotify" or server.stat-cache-engine = "kqueue"
for stat() results to be cached longer (16 seconds)
- mod_auth: set auth.cache = ("max-age" => "600") to cache passwords (default
disabled), but acknowledge changes to your security posture if enabling the
cache. (since lighttpd 1.4.56)
- mod_deflate: set deflate.cache-dir to cache (and reuse) compressed static
assets based on ETag (since lighttpd 1.4.56)
- mod_dirlisting: set dir-listing.cache = ( ... ) to configure caching of
generated directory listings (since lighttpd 1.4.60)
* do not sacrifice security to save a few CPU cycles
- server.http-parseopts* option defaults are recommended, and are very fast
- disabling server.http-parseopts* might save a few CPU cycles, but is an
anti-pattern for secure configurations
- server.http-parseopts* options should be modified only when the
functionality needs to be tuned for proper site operation
- ETag response headers are used in HTTP/1.1 conditional caching.
ETag response headers are also required for mod_deflate and strongly
recommended with mod_webdav. While lighttpd ETag generation for
static content can be disabled for micro-benchmarking purposes,
ETag generation (default enabled) is recommended for production use
(etag.use-inode, etag.use-mtime, etag.use-size)
* compile lighttpd with mmap support (./configure --enable-mmap) to improve
mod_deflate performance
lighttpd configuration for use of operating system (OS) features
----------------------------------------------------------------
lighttpd generally chooses optimal defaults for the OS on which it is running.
Prefer lighttpd defaults unless something is not functioning correctly.
(Please report bugs and include your platform information if the lighttpd OS
defaults are not working correctly.)
* server.event-handler (e.g. epoll, kqueue, event ports, devpoll, poll, ...)
* server.network-backend (e.g. sendfile, writev, write)
lighttpd configuration tuning for high-traffic sites with a large number of connections
---------------------------------------------------------------------------------------
* test with server.max-fds = 16384 (or higher) and OS system and/or per-user
ulimit -Hn might need to be adjusted to allow this or higher values.
For each 4k increase in server.max-fds, lighttpd uses an additional ~100 kb
of memory for internal structures, not including memory used by each active
connection. (In other words, there is a marginal cost for using very high
values when there are not nearly so many simultaneous open connections).
server.max-connections is calculated to be 1/3 of server.max-fds if
server.max-connections is not configured.
lighttpd configuration tuning for low-memory systems
----------------------------------------------------
* test with server.max-fds = 128 (or lower)
* test with server.max-connections = 16 (or lower)
* test with server.listen-backlog = 16 (or lower)
* (default) server.stat_cache-engine = "simple"
* (default) ssl.read-ahead = "disable"
* support for the HTTP/2 protocol (enabled by default in lighttpd 1.4.59) uses
more memory than HTTP/1.1; low-memory systems might choose to disable HTTP/2
protocol support: server.feature-flags += ("server.h2proto" => "disable")
lighttpd configuration tuning for traffic shapping (download rate-limiting)
--------------------------------------------------
connection.kbytes-per-second
server.kbytes-per-second
lighttpd configuration tuning for timeouts
------------------------------------------
To free up connections more quickly, tune down the idle timeouts for how long
lighttpd waits to read or write to the client (when lighttpd is trying to read
or write), or how long lighttpd waits for the next keep-alive request, and for
how many keep-alive requests, before lighttpd closes the connection. A value
of 0 disables an idle timeout and is not recommended.
* server.max-read-idle = 60
* server.max-write-idle = 360
* server.max-keep-alive-idle = 5
* server.max-keep-alive-requests = 100
Generally, server.max-keep-alive-requests should not be set to 0 since setting
up a new TCP connection takes more resources than keeping an open idle fd,
especially if the connection is over TLS.
Platform-Specific Notes
=======================
Note: The following is old and possibly out-dated.
Please consider only as a starting point for further testing.
Linux
-----
For Linux 2.4.x you should think about compiling lighttpd with the option
``--disable-lfs`` to disable the support for files larger than 2GB. lighttpd will
fall back to the ``writev() + mmap()`` network calls which is ok, but not as
fast as possible but support files larger than 2GB.
Disabling the TCP options reduces the overhead of each TCP packet and might
help to get the last few percent of performance out of the server. Be aware that
disabling these options most likely decreases performance for high-latency and lossy
links.
- net.ipv4.tcp_sack = 0
- net.ipv4.tcp_timestamps = 0
Increasing the TCP send and receive buffers will increase the performance a
lot if (and only if) you have a lot of large files to send.
- net.ipv4.tcp_wmem = 4096 65536 524288
- net.core.wmem_max = 1048576
If you have a lot of large file uploads, increasing the receive buffers will help.
- net.ipv4.tcp_rmem = 4096 87380 524288
- net.core.rmem_max = 1048576
Keep in mind that every TCP connection uses the configured amount of memory for socket
buffers. If you've got many connections this can quickly drain the available memory.
See http://www.acc.umu.se/~maswan/linux-netperf.txt for more information on these parameters.
FreeBSD
-------
On FreeBSD you might gain some performance by enabling accept filters. Just
compile your kernel with: ::
options ACCEPT_FILTER_HTTP
For more ideas about tuning FreeBSD read: tuning(7)
Reducing the recvspace should always be ok if the server only handles HTTP
requests without large uploads. Increasing the sendspace would reduce the
system load if you have a lot of large files to be sent, but keep in mind that
you have to provide the memory in the kernel for each connection. 1024 * 64KB
would mean 64MB of kernel RAM. Keep this in mind.
- net.inet.tcp.recvspace = 4096