[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
#ifndef INCLUDED_GW_BACKEND_H
|
|
|
|
#define INCLUDED_GW_BACKEND_H
|
|
|
|
|
|
|
|
#include "first.h"
|
|
|
|
|
|
|
|
#include <sys/types.h>
|
2017-07-15 20:19:01 +00:00
|
|
|
#include "sys-socket.h"
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
#include "array.h"
|
|
|
|
#include "buffer.h"
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
char **ptr;
|
|
|
|
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t size;
|
|
|
|
uint32_t used;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
} char_array;
|
|
|
|
|
|
|
|
typedef struct gw_proc {
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t id; /* id will be between 1 and max_procs */
|
|
|
|
unsigned short port; /* config.port + pno */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
buffer *unixsocket; /* config.socket + "-" + id */
|
2017-07-15 20:19:01 +00:00
|
|
|
socklen_t saddrlen;
|
|
|
|
struct sockaddr *saddr;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
/* either tcp:<host>:<port> or unix:<socket> for debugging purposes */
|
|
|
|
buffer *connection_name;
|
|
|
|
|
|
|
|
pid_t pid; /* PID of the spawned process (0 if not spawned locally) */
|
|
|
|
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t load; /* number of requests waiting on this process */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
struct gw_proc *prev, *next; /* see first */
|
|
|
|
|
2019-11-13 05:40:28 +00:00
|
|
|
time_t last_used; /* see idle_timeout */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
time_t disabled_until; /* proc disabled until given time */
|
|
|
|
|
|
|
|
int is_local;
|
|
|
|
|
|
|
|
enum {
|
|
|
|
PROC_STATE_RUNNING, /* alive */
|
|
|
|
PROC_STATE_OVERLOADED, /* listen-queue is full */
|
|
|
|
PROC_STATE_DIED_WAIT_FOR_PID, /* */
|
|
|
|
PROC_STATE_DIED, /* marked as dead, should be restarted */
|
|
|
|
PROC_STATE_KILLED /* killed (signal sent to proc) */
|
|
|
|
} state;
|
|
|
|
} gw_proc;
|
|
|
|
|
|
|
|
typedef struct {
|
|
|
|
/* the key that is used to reference this value */
|
2019-11-19 01:15:26 +00:00
|
|
|
const buffer *id;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
/* list of processes handling this extension
|
|
|
|
* sorted by lowest load
|
|
|
|
*
|
|
|
|
* whenever a job is done move it up in the list
|
|
|
|
* until it is sorted, move it down as soon as the
|
|
|
|
* job is started
|
|
|
|
*/
|
|
|
|
gw_proc *first;
|
|
|
|
gw_proc *unused_procs;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* spawn at least min_procs, at max_procs.
|
|
|
|
*
|
|
|
|
* as soon as the load of the first entry
|
|
|
|
* is max_load_per_proc we spawn a new one
|
|
|
|
* and add it to the first entry and give it
|
|
|
|
* the load
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
unsigned short min_procs;
|
|
|
|
unsigned short max_procs;
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t num_procs; /* how many procs are started */
|
|
|
|
uint32_t active_procs; /* how many procs in state PROC_STATE_RUNNING */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
unsigned short max_load_per_proc;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* kick the process from the list if it was not
|
|
|
|
* used for idle_timeout until min_procs is
|
|
|
|
* reached. this helps to get the processlist
|
|
|
|
* small again we had a small peak load.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
unsigned short idle_timeout;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* time after a disabled remote connection is tried to be re-enabled
|
|
|
|
*
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
unsigned short disable_time;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* some gw processes get a little bit larger
|
|
|
|
* than wanted. max_requests_per_proc kills a
|
|
|
|
* process after a number of handled requests.
|
|
|
|
*
|
|
|
|
*/
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t max_requests_per_proc;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
|
|
|
|
/* config */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* host:port
|
|
|
|
*
|
2020-02-22 22:24:12 +00:00
|
|
|
* if host is one of the local IP addresses the
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
* whole connection is local
|
|
|
|
*
|
|
|
|
* if port is not 0, and host is not specified,
|
|
|
|
* "localhost" (INADDR_LOOPBACK) is assumed.
|
|
|
|
*
|
|
|
|
*/
|
2019-11-19 01:15:26 +00:00
|
|
|
const buffer *host;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
unsigned short port;
|
|
|
|
unsigned short family; /* sa_family_t */
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Unix Domain Socket
|
|
|
|
*
|
|
|
|
* instead of TCP/IP we can use Unix Domain Sockets
|
|
|
|
* - more secure (you have fileperms to play with)
|
|
|
|
* - more control (on locally)
|
|
|
|
* - more speed (no extra overhead)
|
|
|
|
*/
|
2019-11-19 01:15:26 +00:00
|
|
|
const buffer *unixsocket;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
/* if socket is local we can start the gw process ourself
|
|
|
|
*
|
|
|
|
* bin-path is the path to the binary
|
|
|
|
*
|
|
|
|
* check min_procs and max_procs for the number
|
|
|
|
* of process to start up
|
|
|
|
*/
|
2019-11-19 01:15:26 +00:00
|
|
|
const buffer *bin_path;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
/* bin-path is set bin-environment is taken to
|
2020-02-22 22:24:12 +00:00
|
|
|
* create the environment before starting the
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
* FastCGI process
|
|
|
|
*
|
|
|
|
*/
|
2019-11-19 01:15:26 +00:00
|
|
|
const array *bin_env;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
2019-11-19 01:15:26 +00:00
|
|
|
const array *bin_env_copy;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* docroot-translation between URL->phys and the
|
|
|
|
* remote host
|
|
|
|
*
|
|
|
|
* reasons:
|
|
|
|
* - different dir-layout if remote
|
|
|
|
* - chroot if local
|
|
|
|
*
|
|
|
|
*/
|
2019-11-19 01:15:26 +00:00
|
|
|
const buffer *docroot;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
/*
|
|
|
|
* check_local tells you if the phys file is stat()ed
|
|
|
|
* or not. FastCGI doesn't care if the service is
|
|
|
|
* remote. If the web-server side doesn't contain
|
|
|
|
* the FastCGI-files we should not stat() for them
|
|
|
|
* and say '404 not found'.
|
|
|
|
*/
|
|
|
|
unsigned short check_local;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* append PATH_INFO to SCRIPT_FILENAME
|
|
|
|
*
|
|
|
|
* php needs this if cgi.fix_pathinfo is provided
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
unsigned short break_scriptfilename_for_php;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* workaround for program when prefix="/"
|
|
|
|
*
|
|
|
|
* rule to build PATH_INFO is hardcoded for when check_local is disabled
|
|
|
|
* enable this option to use the workaround
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
unsigned short fix_root_path_name;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If the backend includes X-Sendfile in the response
|
|
|
|
* we use the value as filename and ignore the content.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
unsigned short xsendfile_allow;
|
2019-11-19 01:15:26 +00:00
|
|
|
const array *xsendfile_docroot;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
2019-11-13 05:40:28 +00:00
|
|
|
int32_t load;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t max_id; /* corresponds most of the time to num_procs */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
2019-11-19 01:15:26 +00:00
|
|
|
const buffer *strip_request_uri;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
2018-08-09 04:40:37 +00:00
|
|
|
unsigned short tcp_fin_propagate;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
unsigned short kill_signal; /* we need a setting for this as libfcgi
|
|
|
|
applications prefer SIGUSR1 while the
|
|
|
|
rest of the world would use SIGTERM
|
|
|
|
*sigh* */
|
|
|
|
|
|
|
|
int listen_backlog;
|
|
|
|
int refcount;
|
|
|
|
|
|
|
|
char_array args;
|
|
|
|
} gw_host;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* one extension can have multiple hosts assigned
|
|
|
|
* one host can spawn additional processes on the same
|
|
|
|
* socket (if we control it)
|
|
|
|
*
|
|
|
|
* ext -> host -> procs
|
|
|
|
* 1:n 1:n
|
|
|
|
*
|
|
|
|
* if the gw process is remote that whole goes down
|
|
|
|
* to
|
|
|
|
*
|
|
|
|
* ext -> host -> procs
|
|
|
|
* 1:n 1:1
|
|
|
|
*
|
|
|
|
* in case of PHP and FCGI_CHILDREN we have again a procs
|
|
|
|
* but we don't control it directly.
|
|
|
|
*
|
|
|
|
*/
|
|
|
|
|
|
|
|
typedef struct {
|
2019-11-23 05:48:24 +00:00
|
|
|
const buffer key; /* like .php */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
int note_is_sent;
|
|
|
|
int last_used_ndx;
|
|
|
|
|
|
|
|
gw_host **hosts;
|
|
|
|
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t used;
|
|
|
|
uint32_t size;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
} gw_extension;
|
|
|
|
|
|
|
|
typedef struct {
|
2019-11-23 05:48:24 +00:00
|
|
|
gw_extension *exts;
|
2019-11-13 05:40:28 +00:00
|
|
|
uint32_t used;
|
|
|
|
uint32_t size;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
} gw_exts;
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2018-03-25 07:45:05 +00:00
|
|
|
#include "base_decls.h"
|
|
|
|
#include "chunk.h"
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
#include "plugin.h"
|
|
|
|
#include "response.h"
|
|
|
|
|
|
|
|
typedef struct gw_plugin_config {
|
|
|
|
gw_exts *exts;
|
|
|
|
gw_exts *exts_auth;
|
|
|
|
gw_exts *exts_resp;
|
2019-11-13 05:40:28 +00:00
|
|
|
const array *ext_mapping;
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
int balance;
|
|
|
|
int proto;
|
|
|
|
int debug;
|
|
|
|
} gw_plugin_config;
|
|
|
|
|
|
|
|
/* generic plugin data, shared between all connections */
|
|
|
|
typedef struct gw_plugin_data {
|
|
|
|
PLUGIN_DATA;
|
2019-11-13 05:40:28 +00:00
|
|
|
pid_t srv_pid; /* must precede gw_plugin_config for mods w/ larger struct */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
gw_plugin_config conf; /* used only as long as no gw_handler_ctx is setup */
|
2019-11-13 05:40:28 +00:00
|
|
|
gw_plugin_config defaults;/*(must not be used by gw_backend.c: lg struct) */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
} gw_plugin_data;
|
|
|
|
|
|
|
|
/* connection specific data */
|
|
|
|
typedef enum {
|
|
|
|
GW_STATE_INIT,
|
|
|
|
GW_STATE_CONNECT_DELAYED,
|
|
|
|
GW_STATE_PREPARE_WRITE,
|
|
|
|
GW_STATE_WRITE,
|
|
|
|
GW_STATE_READ
|
|
|
|
} gw_connection_state_t;
|
|
|
|
|
2019-12-01 07:13:21 +00:00
|
|
|
struct fdevents; /* declaration */
|
|
|
|
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
#define GW_RESPONDER 1
|
|
|
|
#define GW_AUTHORIZER 2
|
|
|
|
#define GW_FILTER 3 /*(not implemented)*/
|
|
|
|
|
|
|
|
typedef struct gw_handler_ctx {
|
|
|
|
gw_proc *proc;
|
|
|
|
gw_host *host;
|
|
|
|
gw_extension *ext;
|
|
|
|
gw_extension *ext_auth; /* (future: might allow multiple authorizers)*/
|
|
|
|
unsigned short gw_mode; /* mode: GW_AUTHORIZER or GW_RESPONDER */
|
|
|
|
|
|
|
|
gw_connection_state_t state;
|
|
|
|
time_t state_timestamp;
|
|
|
|
|
|
|
|
chunkqueue *rb; /* read queue */
|
|
|
|
off_t wb_reqlen;
|
2020-09-29 20:50:39 +00:00
|
|
|
chunkqueue wb; /* write queue */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
buffer *response;
|
|
|
|
|
2019-12-01 07:13:21 +00:00
|
|
|
struct fdevents *ev;
|
2019-03-01 04:58:49 +00:00
|
|
|
fdnode *fdn; /* fdevent (fdnode *) object */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
int fd; /* fd to the gw process */
|
|
|
|
|
|
|
|
pid_t pid;
|
|
|
|
int reconnects; /* number of reconnect attempts */
|
|
|
|
|
|
|
|
int request_id;
|
|
|
|
int send_content_body;
|
|
|
|
|
|
|
|
http_response_opts opts;
|
|
|
|
gw_plugin_config conf;
|
|
|
|
|
2020-01-13 02:51:12 +00:00
|
|
|
request_st *r; /* dumb pointer */
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
gw_plugin_data *plugin_data; /* dumb pointer */
|
2019-11-26 07:13:05 +00:00
|
|
|
handler_t(*stdin_append)(struct gw_handler_ctx *hctx);
|
|
|
|
handler_t(*create_env)(struct gw_handler_ctx *hctx);
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
void(*backend_error)(struct gw_handler_ctx *hctx);
|
|
|
|
void(*handler_ctx_free)(void *hctx);
|
|
|
|
} gw_handler_ctx;
|
|
|
|
|
|
|
|
|
2019-11-19 01:15:26 +00:00
|
|
|
__attribute_cold__
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
void * gw_init(void);
|
2019-11-19 01:15:26 +00:00
|
|
|
|
|
|
|
__attribute_cold__
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
void gw_plugin_config_free(gw_plugin_config *s);
|
2019-11-19 01:15:26 +00:00
|
|
|
|
|
|
|
__attribute_cold__
|
2019-11-19 08:39:40 +00:00
|
|
|
void gw_free(void *p_d);
|
2019-11-19 01:15:26 +00:00
|
|
|
|
2019-11-23 04:13:12 +00:00
|
|
|
__attribute_cold__
|
|
|
|
void gw_exts_clear_check_local(gw_exts *exts);
|
|
|
|
|
2019-11-19 01:15:26 +00:00
|
|
|
__attribute_cold__
|
2019-11-13 05:40:28 +00:00
|
|
|
int gw_set_defaults_backend(server *srv, gw_plugin_data *p, const array *a, gw_plugin_config *s, int sh_exec, const char *cpkkey);
|
2019-11-19 01:15:26 +00:00
|
|
|
|
|
|
|
__attribute_cold__
|
2019-11-13 05:40:28 +00:00
|
|
|
int gw_get_defaults_balance(server *srv, const buffer *b);
|
2019-11-19 01:15:26 +00:00
|
|
|
|
2020-01-13 02:51:12 +00:00
|
|
|
handler_t gw_check_extension(request_st *r, gw_plugin_data *p, int uri_path_handler, size_t hctx_sz);
|
2020-07-25 12:23:58 +00:00
|
|
|
handler_t gw_handle_request_reset(request_st *r, void *p_d);
|
2020-01-13 02:51:12 +00:00
|
|
|
handler_t gw_handle_subrequest(request_st *r, void *p_d);
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
handler_t gw_handle_trigger(server *srv, void *p_d);
|
2017-09-10 19:28:51 +00:00
|
|
|
handler_t gw_handle_waitpid_cb(server *srv, void *p_d, pid_t pid, int status);
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
2019-11-26 07:13:05 +00:00
|
|
|
void gw_set_transparent(gw_handler_ctx *hctx);
|
[core] shared code for socket backends
common codebase for socket backends, based off mod_fastcgi with
some features added for mod_proxy
(mostly intended to reduce code duplication and enhance code isolation)
mod_fastcgi and mod_scgi can now use fastcgi.balance and scgi.balance
for similar behavior as proxy.balance, but the balancing is per-host
and not per-proc. proxy.balance is also per-host and not per-proc.
mod_proxy and mod_scgi can now use proxy.map-extensions and
scgi.map-extensions, similar to fastcgi.map-extensions.
mod_fastcgi behavior change (affects only mod_status):
- statistics tags have been renamed from "fastcgi.*" to "gw.*"
"fastcgi.backend.*" -> "gw.backend.*"
"fastcgi.active-requests" -> "gw.active-requests"
("fastcgi.requests" remains "fastcgi.requests")
("proxy.requests" is new)
("scgi.requests" is new)
mod_scgi behavior change (likely minor):
- removed scgi_proclist_sort_down() and scgi_proclist_sort_up().
procs now chosen based on load as measured by num socket connnections
Note:
modules using gw_backend.[ch] are currently still independent modules.
If it had been written as a single module with fastcgi, scgi, proxy
implementations, then there would have been a chance of breaking some
existing user configurations where module ordering made a difference
for which module handled a given request, though for most people, this
would have made no difference.
Details about mod_fastcgi code transformations:
unsigned int debug -> int debug
fastcgi_env member removed from plugin_config
renamed "fcgi" and "fastcgi" to "gw", and "FCGI" to "GW"
reorganize routines for high-level and lower-level interfaces
some lower-level internal interfaces changed to use host,proc,debug
args rather than knowing about higher-level (app) hctx and plugin_data
tabs->spaces and reformatting
2017-07-14 05:29:18 +00:00
|
|
|
|
|
|
|
#endif
|